MIM Shrinkage and Tolerances
Plan the green size, functional datums and production variation
Read the full article and infographic ยท CSMFG powder metallurgy services
Transcript
Shrinkage needs a plan
A MIM green part is larger than the final part because sintering changes its dimensions. Actual behavior depends on feedstock and processing.
Use the correct calculation
For an illustrative twenty millimeter finished length and twenty percent linear shrinkage, divide twenty by zero point eight. The green estimate is twenty-five millimeters.
The example is not a tool rule
Production tooling needs measured trials. Geometry, direction, mold details, and support can change the dimensional result.
Use functional datums
A bore diameter and its position relative to a contact face can matter more than the outside contour. Inspect from assembly-relevant datums.
Validate repeatability
Sample across cavities, batches, and furnace positions. One favorable first article does not establish production capability.
Compare finishing options
Allow selected machining or sizing where justified. Review the tolerance plan with CSMFG before freezing the drawing.