Video library

Metal Injection Molding Process

How powder and binder become a finished metal component

Read the full article and infographic ยท CSMFG powder metallurgy services

Transcript

What is MIM?

Metal injection molding makes small, complex metal parts by molding a mixture of fine powder and binder, then removing the binder and sintering the shape.

Mix the feedstock

The binder gives metal powder the flow needed to fill a mold. Powder loading and mixing consistency affect later processing.

Mold the green part

The injection mold produces a green part. Tooling allows for later shrinkage, while gates and ejection influence quality.

Remove binder

Debinding removes much of the binder. The brown part is fragile, so its handling and support matter.

Sinter and finish

Sintering bonds the powder particles and changes dimensions. Heat treatment, machining, or surface finishing may follow before inspection.

Evaluate your part

Consider geometry, alloy, volume, and qualified performance together. Discuss your drawing with CSMFG at csmfg dot com.