CASTING


Since 2003, we have served our customers with a wide range of casting products in different materials.

Casting process

  • Sand casting
  • Rapid casting
  • Permanent mold casting
  • Lost wax casting
  • Lost foam casting
  • Investment casting
  • Die Casting
  • Centrifugal casting
  • Shell mold casting
  • Vacuum casting

Materials

  • Aluminum
  • Stainless steel
  • Steel
  • Brass, copper zinc alloys
  • Zinc, Zinc alloys

With our experience in casting and we consult our clients to choose the most cost effective process under different points of view:

Required quality of the casting surface

Required dimensional accuracy of the casting

Quantity of casting products

Casting product material

Type of pattern and core box equipment needed

Cost of making the mold(s)

Influeuce on the design of the casting with selected process.

Each casting process has its advantages and disadvantages depended on the products needs

Sand Casting

Sand casting is one of the most popular and simplest types of casting, and has been used for centuries. Sand casting allows for smaller batches than permanent mold casting and at a very reasonable cost.

Shell Mold Casting

Our foundry in Zhejiang does shell mold casting for steel and aluminum. The resin sand mold enables complex geometries to be cast. We typically manufacture medium size parts require high accuracy such as gear housings, heat exchanger, connecting rods, and lever arms.

Lost Form Casting

Lost form casting offers similar benefits as lost wax casting, but avoiding complex process of making wax shell. It is relatively simple to make mold and allows recycling of sand. It is consisted of three stages

White Mold Stage: Mold Foam into shape

Yellow Mold Stage: Coating the Mold

Black Mold Stage: Pour Liquid Metal, which takes place of the foam.

Our facility in Hebei has excellent capacities to do Lost Foam Casting. In addition, we work closely with leading research institute in Sichuan China to obtain chemicals used in the process and reduce pollution.

Vacuum Casting

Vacuum casting uses a plastic film to cover sand surface and uses vacuum to shape sand. It produces casting parts with better surface and dimensional accuracy. It is a greener method than traditional casting.
Our factory in Jiangsu China can cast steel or s.g. iron, from weight 10Kg to 3000kg. Please see the pictures below for samples of products.

Centrifugal casting

In this process molten metal is poured in the mold and allowed to solidify while the mold is rotating. Metal is poured into the center of the mold at its axis of rotation. Due to centrifugal force the liquid metal is thrown out towards the periphery.

Permanent mold

Permanent mold casting is a metal casting process that employs reusable molds ("permanent molds"), usually made from metal. The most common process uses gravity to fill the mold. However, gas pressure or a vacuum are also used.

Lost Wax Casting

Lost-wax casting (also called investment casting) is the process by which a duplicated metal sculpture (often silver, gold, brass or bronze) is cast from an original sculpture. Variations of the process include: "lost mold", which recognizes that materials other than wax can be used (such as: tallow, resin, tar and textile) and "waste wax process" (or "waste mold casting"), because the mold is destroyed to remove the cast item.

Die Casting

The die casting process forces molten metal under high pressure into mold cavities (which are machined into dies). Most die castings are made from nonferrous metals, specifically zinc, copper, and aluminum-based alloys, but ferrous metal die castings are possible. The die casting method is especially suited for applications where many small to medium-sized parts are needed with good detail, a fine surface quality and dimensional consistency.

Most of the cast products require machining process after casting. Our customers ask for rough or precise machining. It helps to detect casting defects before shipping. We are familiar with machining properties of various cast steels materials. Typically, we can machine economically for IT6 to IT8 dimensional tolerance levels.

Furthermore, we are offering our customers a one stop solution . For example, after casting and machining the metal products we finish with surface treatment

  • Powder Coating
  • Spray painting
  • Silk printing
  • Galvanizing
  • Polishing
  • Anodizing

Distinct benefits of working with us:

Clear engineering communication in English and German, which is vital prerequisite for manufacturing projects

CONTACT US NOW

One-stop shopping for projects that require multiple manufacturing processes, from metal fabrication to plastic molding.

Manufacturing Process List

Strong process control, high quality standards, and a large and dedicated QC team

MORE ABOUT QUALITY

Best price in China through manufacturing excellence and economy of scale.

GET A FREE QUOTE NOW